D-D aquarium lid planning
Built around your Aqua-Pro Reef 1350.
D-D Aqua-Pro Reef 1350 is documented in Keepr's research catalog, but its lid-seat geometry cannot be represented safely as a prefilled design. Use the evidence below to plan your measurements, then build from the exact tank in front of you.
The source material is useful for measurement planning, but this geometry cannot be safely prefilled in the current builder.
- Published outside footprint
- 1350 × 600 mm (53.15 × 23.62 in)
- Pane construction
- 15 and 12 mm glass; surfaces not identified
- Builder support
- Build from customer measurements
Evidence
What is documented
- Published outside footprint: 1350 × 600 mm (53.15 × 23.62 in).
- Pane construction: 15 and 12 mm glass; surfaces not identified.
- The source material is useful for measurement planning, but this geometry cannot be safely prefilled in the current builder.
- Largest manufacturer-published glass thickness used as a conservative working value; the three-thickness or unmapped construction remains manual.
- Catalog evidence reviewed 2026-07-24.
Design guidance
Plan the lid around this tank
- No factory opening is treated as production-ready. Add only the openings and equipment routes you measure.
- Choose section seams so each printed frame stays practical to handle without crossing an overflow or light mount.
Process
From profile to production drawing
- Match the research to the exact tank and generation.
- Measure the lid seat and every equipment opening.
- Design the lid and review the live quote.
- Approve the production drawing before checkout.
Questions
Before you build
Do I still need to measure my D-D Aqua-Pro Reef 1350?
Yes. Confirm the exact model and generation, measure your own tank and equipment, review every opening, and approve the production drawing before ordering.
What does “Reference only” mean?
The source material is useful for measurement planning, but this geometry cannot be safely prefilled in the current builder.
Can Keepr prefill this tank in the builder?
No. The current builder cannot represent this lid-seat geometry safely. Start from your own measurements and use the listed sources as research guidance only.
How is a Keepr custom lid priced?
Keepr lids are priced at CA$0.30/cm³ of finished printed material, including supports and printed accessories. See your exact quote in the builder. Shipping and taxes are calculated at checkout.
What does the Keepr Fit Guarantee cover?
You measure your tank and approve the production drawings. We manufacture to that approved design. If the lid still does not fit, Keepr will remake it free under the Fit Guarantee terms. You pay shipping for the remake.
Research trail
