HelloReef aquarium lid planning
Built around your Clownfish & Anemone Aquarium Kit (200419).
Use Keepr's research-backed HelloReef Clownfish & Anemone Aquarium Kit (200419) profile as a measured starting point. Verify every estimated value and equipment opening on your own tank before approving production.
Some geometry is estimated or derived from related documentation and must be checked against the exact aquarium.
- Published outside footprint
- 381 × 381 mm (15.00 × 15.00 in)
- Pane construction
- Estimated 6 mm; verify every pane
- Builder support
- Starting profile available
Evidence
What is documented
- Published outside footprint: 381 × 381 mm (15.00 × 15.00 in).
- Pane construction: Estimated 6 mm; verify every pane.
- Some geometry is estimated or derived from related documentation and must be checked against the exact aquarium.
- Size- and construction-based working estimate; the manufacturer does not publish pane thickness.
- Temporary rear-chamber depth derived from comparable compact AIO layouts; HelloReef publishes the outside footprint but does not publish the display depth or lid datum.
- Catalog evidence reviewed 2026-07-24.
Design guidance
Plan the lid around this tank
- The builder may show a temporary factory-opening estimate. Replace its size and position with measurements from your tank.
- Choose section seams so each printed frame stays practical to handle without crossing an overflow or light mount.
Process
From profile to production drawing
- Match the research to the exact tank and generation.
- Measure the lid seat and every equipment opening.
- Design the lid and review the live quote.
- Approve the production drawing before checkout.
Questions
Before you build
Do I still need to measure my HelloReef Clownfish & Anemone Aquarium Kit (200419)?
Yes. Confirm the exact model and generation, measure your own tank and equipment, review every opening, and approve the production drawing before ordering.
What does “Reference profile” mean?
Some geometry is estimated or derived from related documentation and must be checked against the exact aquarium.
How is a Keepr custom lid priced?
Keepr lids are priced at CA$0.30/cm³ of finished printed material, including supports and printed accessories. See your exact quote in the builder. Shipping and taxes are calculated at checkout.
What does the Keepr Fit Guarantee cover?
You measure your tank and approve the production drawings. We manufacture to that approved design. If the lid still does not fit, Keepr will remake it free under the Fit Guarantee terms. You pay shipping for the remake.
Research trail
